Selüloz film ve moleküler yönlenme
Künye
Yel H., Gindl W., Kalaycioğlu H., Dönmez Çavdar A., "Selüloz Film Ve Moleküler Yönlenme", III. Ulusal Karadeniz Ormancılık Kongresi, ARTVİN, TÜRKİYE, 20-22 Mayıs 2010, cilt 5, ss.1959-1967Özet
Selüloz ve nano ölçekte bileşenlerinin direkt kullanımının yanı sıra selüloz çözündürülerek film (selüloz film vb) ve lifler’e (lyocell, viskoz vb.) dönüştürülebilmektedir. Yapılan çalışmalar neticesinde üretim parametreleri kontrol edilerek rejenere selüloz filmlerin mekanik özellikleri büyük oranda ayarlanabilmektedir. Polimer film ve liflerin üretiminde mekanik anizotropi elde edebilmek için istenilen yönlendirme derecesi ayarlanabilmektedir. Fakat rastgele yönlenmiş selüloz filmlerin üretim sonrası yönlendirilmesi oldukça yeni bir gelişme olup, sadece laboratuar ortamında gerçekleştirilebilmektedir. Üretimi tamamlanmış hava kurusu selüloz filmleri tekrar yönlendirilerek elastikiyet modülü ve direnç değerlerinde önemli artışların olduğu tespit edilmiştir. Selüloz filmler başlangıç uzunluğuna göre kuru şartlarda % 6 ve ıslak şartlarda ise % 50’sine kadar gerdirilebilmektedir. Laboratuvar ortamında gerdirme işlemi ile selülozun çekme direncinde 2 katı, elastikiyet modülünde ise 3 katı kadarlık bir artış elde edilebilmektedir. Besides the direct use of natural fibers and their nanoscale constituents for reinforcement, cellulose may also be dissolved and converted to films or spun into fibers. By controlling process parameters, the mechanical properties of regenerated cellulose fibers may be tuned within a wide range. In the production of polymer films and fibers, preferred orientation, if desired, is introduced in order to achieve mechanical anisotropy. Uniaxially orientation after production of randomly oriented cellulose films is a relatively novel method and can be achieved in laboratory conditions. Significant increases in modulus of rapture (MOR) and modulus of elasticity (MOE) of the already consolidated cellulose films by their reorientation was determined. Cellulose films can be stretched to %6 and %50 of its beginning length in dry and wet condition, respectively. In laboratory condition, it can be obtained the increases by 2 times and 3 times in MOR and MOE of cellulose films by means of drawing process, respectively.