• Türkçe
    • English
  • Türkçe 
    • Türkçe
    • English
  • Giriş
Öğe Göster 
  •   DSpace@Artvin
  • Fakülteler
  • Orman Fakültesi
  • Orman Endüstri Mühendisliği Bölümü
  • Orman Endüstri Mühendisliği Bölümü Yayın Koleksiyonu
  • Öğe Göster
  •   DSpace@Artvin
  • Fakülteler
  • Orman Fakültesi
  • Orman Endüstri Mühendisliği Bölümü
  • Orman Endüstri Mühendisliği Bölümü Yayın Koleksiyonu
  • Öğe Göster
JavaScript is disabled for your browser. Some features of this site may not work without it.

Effect of press temperature on some properties of cement bonded particleboard

Thumbnail

Göster/Aç

husnu.yel.pdf (886.8Kb)

Erişim

info:eu-repo/semantics/openAccess

Tarih

2020

Yazar

Yel, Hüsnü
Cavdar, Ayfer Dönmez
Torun, Sevda Boran

Üst veri

Tüm öğe kaydını göster

Künye

Yel, H., Cavdar, A. D., & Torun, S. B. (2020). Effect of press temperature on some properties of cement bonded particleboard. Maderas. Ciencia y tecnología, (AHEAD), 21(1).83-92. doi: 10.4067/S0718-221X2020005000108.

Özet

It is known that there is a correlation between hydration heat and physico-mechanical properties of wood based cement panels. Cement hydration is affected by many variables, such as chemical composition, water/cement ratio, wood/cement ratio, wood chemical properties, mineral additions and producing conditions. This study mainly aimed to investigate the effects of press temperature on some properties of three-layer cement bonded particleboard made from the particles of spruce (Picea orientalis) and poplar (Populus tremula). For this purpose, a total of 16 experimental board groups with 1200 kg/m3 target density and 1/3 wood-cement ratio were produced at the press temperatures of (20, 30, 40, 50, 60, 70 and 80) °C. As cement curing accelerator, CaCl2 was used at a rate of 5 % (cement weight basis). The physical, mechanical and thermal properties of the boards were determined. The results indicated that the press temperature substantially affected the properties of cement-bonded particleboard depending on the wood species. In the light of this study, the optimum temperatures in producing of cement-bonded particleboard were found as 40 °C for poplar wood and 60 °C for spruce wood.

Kaynak

Maderas: Ciencia y Tecnologia

Cilt

22

Sayı

1

Bağlantı

http://dx.doi.org/10.4067/S0718-221X2020005000108
https://hdl.handle.net/11494/2048

Koleksiyonlar

  • Orman Endüstri Mühendisliği Bölümü Yayın Koleksiyonu [164]
  • Scopus İndeksli Yayınlar Koleksiyonu [1029]
  • WoS İndeksli Yayınlar Koleksiyonu [1322]



DSpace software copyright © 2002-2015  DuraSpace
İletişim | Geri Bildirim
Theme by 
@mire NV
 

 




| Politika | Rehber | İletişim |
Gelişmiş Arama

sherpa/romeo

Göz at

Tüm DSpaceBölümler & KoleksiyonlarTarihe GöreYazara GöreKurum Yazarına GöreORCID'e GöreBaşlığa GöreKonuya GöreTüre GöreDile GöreBölüme GöreKategoriye GöreYayıncıya GöreErişim ŞekliBu KoleksiyonTarihe GöreYazara GöreKurum Yazarına GöreORCID'e GöreBaşlığa GöreKonuya GöreTüre GöreDile GöreBölüme GöreKategoriye GöreYayıncıya GöreErişim Şekli

Hesabım

GirişKayıt

İstatistikler

Google Analitik İstatistiklerini Görüntüle

DSpace software copyright © 2002-2015  DuraSpace
İletişim | Geri Bildirim
Theme by 
@mire NV
 

 


|| Politika || Rehber || Kütüphane || Artvin Çoruh Üniversitesi || OAI-PMH ||

Artvin Çoruh Üniversitesi, Artvin, Türkiye
İçerikte herhangi bir hata görürseniz, lütfen bildiriniz:

Creative Commons License
Artvin Çoruh Üniversitesi Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..

DSpace@Artvin:


DSpace 6.2

tarafından İdeal DSpace hizmetleri çerçevesinde özelleştirilerek kurulmuştur.