Show simple item record

dc.contributor.authorYel, Hüsnü
dc.contributor.authorCavdar, Ayfer Dönmez
dc.contributor.authorTorun, Sevda Boran
dc.date.accessioned2020-04-29T08:06:39Z
dc.date.available2020-04-29T08:06:39Z
dc.date.issued2020en_US
dc.identifier.citationYel, H., Cavdar, A. D., & Torun, S. B. (2020). Effect of press temperature on some properties of cement bonded particleboard. Maderas. Ciencia y tecnología, (AHEAD), 21(1).83-92. doi: 10.4067/S0718-221X2020005000108.en_US
dc.identifier.urihttp://dx.doi.org/10.4067/S0718-221X2020005000108
dc.identifier.urihttps://hdl.handle.net/11494/2048
dc.description.abstractIt is known that there is a correlation between hydration heat and physico-mechanical properties of wood based cement panels. Cement hydration is affected by many variables, such as chemical composition, water/cement ratio, wood/cement ratio, wood chemical properties, mineral additions and producing conditions. This study mainly aimed to investigate the effects of press temperature on some properties of three-layer cement bonded particleboard made from the particles of spruce (Picea orientalis) and poplar (Populus tremula). For this purpose, a total of 16 experimental board groups with 1200 kg/m3 target density and 1/3 wood-cement ratio were produced at the press temperatures of (20, 30, 40, 50, 60, 70 and 80) °C. As cement curing accelerator, CaCl2 was used at a rate of 5 % (cement weight basis). The physical, mechanical and thermal properties of the boards were determined. The results indicated that the press temperature substantially affected the properties of cement-bonded particleboard depending on the wood species. In the light of this study, the optimum temperatures in producing of cement-bonded particleboard were found as 40 °C for poplar wood and 60 °C for spruce wood.en_US
dc.language.isoengen_US
dc.publisherUniversidade Federal de Sao Carlosen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectMechanical propertiesen_US
dc.subjectphysical propertiesen_US
dc.subjectPicea orientalisen_US
dc.subjectPopulus tremulaen_US
dc.subjectthermal propertiesen_US
dc.titleEffect of press temperature on some properties of cement bonded particleboarden_US
dc.typearticleen_US
dc.relation.journalMaderas: Ciencia y Tecnologiaen_US
dc.departmentAÇÜ, Orman Fakültesi, Orman Endüstri Mühendisliği Bölümüen_US
dc.authorid0000-0002-0661-9109en_US
dc.identifier.volume22en_US
dc.identifier.issue1en_US
dc.identifier.startpage83en_US
dc.identifier.endpage92en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.doi10.4067/S0718-221X2020005000108en_US
dc.contributor.institutionauthorYel, Hüsnüen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record