Basit öğe kaydını göster

dc.contributor.authorMahouti, Peyman
dc.contributor.authorBelen, Mehmet Ali
dc.contributor.authorGüneş, Filiz
dc.contributor.authorYurt, Reyhan
dc.date.accessioned2020-11-20T08:50:36Z
dc.date.available2020-11-20T08:50:36Z
dc.date.issued2019en_US
dc.identifier.citationMahouti, P., Belen, M. A., Güneş, F., & Yurt, R. (2019). Design and realization of multilayered cylindrical dielectric lens antenna using 3D printing technology. Microwave and Optical Technology Letters, 61(5), 1400-1403, Doi: 10.1002/mop.31720.en_US
dc.identifier.urihttps://hdl.handle.net/11494/2477
dc.description.abstractHerein, design and realization of a novel, low cost, small size, high gain, 3D printed multilayered cylindrical dielectric lens antenna (MLCDLA) is presented at 10 GHz. In the first stage, MLCDLA is designed suitable the 3D printed technology in CST 3D EM simulation environment. Then gain, return loss, and radiation pattern of the design are investigated in the X-band frequencies in the same 3D simulated environment. In the second stage, the designed lens is fabricated by the 3D printed technology in dimensions of 30 x 30 x 52.5 mm(3) using acrylonitrile butadiene styrene, with epsilon(r)=2.5. In the final stage, performance characteristics of the proposed LCDLA are measured using 10 GHz rectangular waveguide as feeding unit and are compared with the simulated results and counterpart designs in literature. The prototyped MLCDLA is achieved 14 dBi measured gain at 10 GHz. It can be concluded that the proposed 3D printing method not only enables a high performance MLCDLA design but also provides its fast, low cost, and effective prototyping process which can be used for other microwave devices.en_US
dc.description.sponsorshipYildiz Technical University: 3427 2017.F14.02.01 Artvin Coruh University: 2017.F14.02.01en_US
dc.language.isoengen_US
dc.publisherWileyen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject3D printingen_US
dc.subjectDielectric lensesen_US
dc.subjectNovel prototyping methodsen_US
dc.subjectWaveguideen_US
dc.titleDesign and realization of multilayered cylindrical dielectric lens antenna using 3D printing technologyen_US
dc.typearticleen_US
dc.relation.journalMicrowave and Optical Technology Lettersen_US
dc.departmentAÇÜ, Mühendislik Fakültesien_US
dc.authorid0000-0002-3351-4433en_US
dc.authorid0000-0001-5588-9407en_US
dc.identifier.volume61en_US
dc.identifier.issue5en_US
dc.identifier.startpage1400en_US
dc.identifier.endpage1403en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.doi10.1002/mop.31720en_US
dc.contributor.institutionauthorBelen, Mehmet Alien_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster