Basit öğe kaydını göster

dc.contributor.advisorPeker, Hüseyin
dc.contributor.authorÇiçek, Seren
dc.date.accessioned2021-04-15T08:37:09Z
dc.date.available2021-04-15T08:37:09Z
dc.date.issued2015
dc.identifier.urihttps://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=WY5CM7tPNE2z_YM6pBu0tyn5zwFmhvw2yFGFFd_ycDwfsZ85-BXw2RfUkUwiEfRN
dc.identifier.urihttps://hdl.handle.net/11494/2989
dc.descriptionYÖK Tez No: 413277en_US
dc.description.abstractBu çalışmada, Ladin (Picea orientalis (l.)Link) odunu barit ve borlu bileşiklerden hazırlanan üç farklı (%1, %3, %5) çözelti konsantrasyonu ile ASTM 1413-76 standartına göre emprenye edilmiş ve bazı fiziksel-mekanik özelliklerde değişimleri araştırılmıştır. Toplam retensiyon, % retensiyon , tam-hava kurusu özgül ağırlık değeri, eğilme direnci, eğilmede elastiklik modülü, basınç direnci, yapışma direnci ve bazı fiziksel özellikler belirlenmek suretiyle mobilya endüstrisinde (dış mekan) kullanılabilme yeteneği belirtilmiştir. Deney sonuçlarına göre; en yüksek hava kurusu özgül ağırlık değeri Barit+Ba (0.80 g/cm3), tam kuru özgül ağırlık Barit+Ba (0.98 g/cm3)' ta gerçekleşirken mekanik özelliklerde en yüksek eğilme direnci değeri Barit+Ba (100 N/mm2), eğilmede elastiklik modülü Barit+Bx (55 N/mm2), basınç direnci barit+ba (65 N/rmm2) , yapışma direnci Barit+Bx (8,47 N/mm2)'de gerçekleşmiş olup; en yüksek su alma oranı Bx'te % 121,9 konsantrasyonda gerçekleşmiştir.en_US
dc.description.abstractIn this study, Picea (Picea orientalis (L.)Link) wood was impregnated according to ASTM 1413-76 standard with the concentration of three different solution concentrations(1%,3%,5%) prepared from barite and boron compounds and changes in some physical-mechanical properties were investigated. Capability of Its use in furniture industry (outdoor) was specified by determining its total retention, % retention, whole air dried specific weight value, bending resistance, elasticity module in bending, pressure resistance, adhesion resistance, and some physical properties. According to experimental results; while the highest air dried specific weight value was observed in Barite+Ba (0.80 g/cm3), whole air dried specific weight value was observed in Barite+Ba (0.98 g/cm3); among mechanical properties, the highest bending resistance was obtained in Barite+Ba (100 N/mm2), elasticity module in bending in Barite+Bx (55 N/mm2), pressure resistance in Barite+Ba (65 N/rmm2), and adhesion resistance in Barite+Bx (8.47 N/mm2); and the highest intake rate was observed in Bx at 121.9% concentration.en_US
dc.language.isoturen_US
dc.publisherArtvin Çoruh Üniversitesien_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAğaç İşlerien_US
dc.subjectWood Productsen_US
dc.subjectLadin odunuen_US
dc.subjectpark-bahçe mobilyasıen_US
dc.subjectemprenyeen_US
dc.subjectborlu bileşikleren_US
dc.subjectSpruce wooden_US
dc.subjectpark-garden furnitureen_US
dc.subjectimpregnationen_US
dc.subjectboron compounds.en_US
dc.titleBarit ve bor bileşiklerinin ladin odununda tutunabilme özelliği ve dış mekan mobilyalarında kullanılabilme olanaklarıen_US
dc.title.alternativeFeature retenti?on on spruce wood of bari?te and boron compounds and abi?li?ty of usi?ng at furni?ture of outdoor olanaklarien_US
dc.typemasterThesisen_US
dc.departmentAÇÜ, Fen Bilimleri Enstitüsü, Orman Endüstri Mühendisliği Ana Bilim Dalıen_US
dc.identifier.startpage1en_US
dc.identifier.endpage59en_US
dc.relation.publicationcategoryTezen_US
dc.contributor.institutionauthorÇiçek, Seren


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster