Orman Endüstri Mühendisliği Bölümü Yayın Koleksiyonu
Recent Submissions
-
Effect of alkaline pre-treatment and chemical additives on the performance of wood cement panels manufactured from sunflower stems
(Elsevier, 2022)This research was performed to investigate the NaOH pre-treatment, chemical additives, and their combined effects on the properties of wood cement panels produced with sunflower stems. The experimental panels were produced ... -
Different types of wood treated with tea plant extract retention values
(Kastamonu Üniversitesi, 2013)In this study, the potentiality of using the organic dying material obtained from the tea plant extracts in the wood protection industry is analyzed and the total retention quality and retention proportion in wood is ... -
New approach to ecological structure effects of medical aromatic plant extract/borax on the anatomical structure of wood and human/environmental health
(Parlar Scientific Publications, 2022)In this century, in which human and environmental health are prioritized in the usage of medical aromatic plant extract and boron chemical, both separately and in combination, when the effect of wood on the anatomical ... -
The effect of some wood preservatives on the thermal degradation of Scots pine
(Elsevier, 2012)Wood has been a structural material for many years; however, its ability to burn has limited its use in some applications. This study aims to evaluate the effect of commercial wood preservatives having concentration of 4% ... -
Microcrystalline cellulose addition effects on the properties of wood cement boards
(Elsevier Ltd, 2022)The study investigates the performance of microcrystalline cellulose (MCC) as reinforcer in cementitious wood particle products. The wood cement boards were produced with various MCC amounts, up to 30 wt % based on wood ... -
Wood wool cement boards and its applications
(Kastamonu Üniversitesi, 2012)Manufacture of wood wool cement boards having unique properties such as high thermal insulation, acoustical properties, fire resistance, bacterial, insect and fungal resistance, low specific gravity are becoming more and ... -
The influence of moisture content of raw material on the physical and mechanical properties, surface roughness, wettability, and formaldehyde emission of particleboard composite
(Elsevier SCI LTD, 2012)The objectives of this research were to investigate surface characteristics, physical (thickness swelling) and mechanical (modulus of rupture, modulus of elasticity and internal bond strength) properties, and formaldehyde ... -
Chemical composition of essential oil by SPME and evaluation of antimicrobial, antioxidant activities of quercus inectoria GALL
(Univ Life Sciences Lublin, 2021)Quercus infectoria galls have been utilized to cure widespread illnesses. In line with it, this paper aims to investigate the chemical combination of the volatile oils obtained from galls of Q. infectoria and evaluate their ... -
Evaluation of pit dimensions and uptake of preservative solutions in wood after permeability improvement by bioincising
(Taylor and Francis Ltd., 2021)Bioincising is a biotechnological process to improve the permeability of wood by biological organisms. In recent years, there has been a great interest to determine the changes in the anatomical structure of wood as a ... -
Application of environmentally friendly organic upper surface process material on wood and its effect on some surface properties
(Gazi Üniversity, 2022)Purpose: Coating wooden material with resin lacquer, which is more sensitive to human health and environment, and hardening the material by dry oven temperature, resulting to measurement of brightness and color change. ... -
Chemical composition and efficiency of bio-oil obtained from giant cane (arundo donax L.) as a wood preservative
(North Carolina State Univ Dept Wood & Paper Sci, 2013)This study aimed at determining the chemical composition of bio-oil from giant cane (Arundo donax L.), as well as its performance as a wood preservative. The performance was determined through water absorption, tangential ... -
Utilization of sunflower stalk in manufacture of thermoplastic composite
(Springer, 2013)Dimensional stability and mechanical performance of polypropylene thermoplastic composites filled with sunflower stalk (SS) flour at 30, 40, 50, and 60 wt% contents of the SS flour were investigated. The thickness swelling ... -
Antimicrobial and antiurease activities of newly synthesized morpholine derivatives containing an azole nucleus
(Springer Birkhauser, 2013)2-[6-(Morpholin-4-yl)pyridin-3-ylamino]acetohydrazide (4) was obtained starting from 6-morpholin-4-ylpyridin-3-amine (2) via the formation of ester (3) and then converted to the corresponding Schiff bases (5, 6) with the ... -
Effect of waste melamine impregnated paper on properties of oriented strand board
(Elsevier SCI LTD, 2013)The objective of this study is to evaluate some of the properties of oriented strand board (OSB) panels manufactured using waste melamine impregnated paper (WMIP) as filler. Shredded WMIP particles were used up to 50% with ... -
Utilization of water reed in production of various insulation panels
(Walter De Gruyter Gmbh, 2013)Some panels and particleboards were made from reed mats and blends of reed-wood chips to be used inside buildings for sound and heat insulations. It was seen that the outer layers of the reed body (spike) was almost water ... -
The influences of drying temperature of wood particles on the quality properties of particleboard composite
(Taylor & Francis Inc, 2013)The objective of this investigation was to evaluate the effects of drying temperature of wood particles on the quality properties of particleboard composite and chemical properties of wood. Test panels were manufactured ... -
The role of solid content of adhesive and panel density on the dimensional stability and mechanical properties of particleboard
(Sage Publications, 2013)The aim of this study was to investigate the role of the panel density and solid content of adhesive on the physical (thickness swelling) and mechanical properties (modulus of rupture, modulus of elasticity, and internal ... -
Effects of anatomical and chemical properties of wood on the quality of particleboard
(Elsevier SCI LTD, 2013)The objective of this study was to investigate the effects of anatomical and chemical structures of wood on the quality properties of particleboard containing different mixture of wood species. Urea-formaldehyde adhesive ... -
Conventional and microwave irradiated synthesis, biological activity evaluation of highly substituted indole-triazole hybrids
(Elsevier B.V., 2021)In the present study, a series of new indole-3-carbaldehyde embedded triazole derivatives have been synthesized. 4-{[(1E)-1H-indol-3-ylmethylidene]amino}-5-methyl-2,4-dihydro-3H-1,2,4-triazol-3-one (2) were converted to ... -
Changes in surface and mechanical properties of heat treated wood during natural weathering
(Elsevier SCI LTD, 2014)In this study, it was aimed to investigate the changes in moisture content, color, surface roughness, compression strength parallel to grain, modulus of rupture and modulus of elasticity of heat treated ash, iroko, Scots ...