Inverter based OTA design using gm/IDtransistor sizing technique
Künye
Atasoyu, M. (2021, June). Inverter based OTA Design Using gm= ID Transistor Sizing Technique. In 2021 29th Signal Processing and Communications Applications Conference (SIU) (pp. 1-4). IEEE.Özet
In this paper, transistor sizing of the inverter-based
operational transconductance amplifier (OTA), which has been
widely used in circuit applications recently, has been implemented
with the gm-ID technique. Especially, considering the unit gain
bandwidth, this design parameter is optmized with this technique.
The proposed inverter-based OTA gain is 25dB, and the unity
gain bandwidth value is 4.82 MHz, which is the simulation result,
and 4.77 MHz, which is the calculated value. The simulated unit
gain bandwidth frequency value, in particular, agrees with the
measured value. Bu yayında, son zamanlarda devre uygulamalarında genisçe yer bulan evirici tabanlı operasyonel geciş iletkenliği kuvvetlendirici devresinin, gm-ID tekniğiyle transistor
boyutlandırılması gerçeklenmiştir. Özellikle, birim kazanç bant genişliği tasarım parametresi bu teknikle optimize edilmiştir. Simulasyon sonuçlarına göre, amaçlanan evirici tabanlı OTA kazancı 25dB’dir ve birim kazanç bant genişliği ise 4.82 MHz simulasyon de geri olarak ve 4.77 MHz hesaplanan değer olarak elde edilmiştir. Bu sonuçlar, birim kazanç¸ bant genişliği parametre belirlenmesinde ki uygulanan methodun etkinliğini göstermektedir.