Single entry raw wood products table construction for calabrian pine (pinus brutia ten.) .in Mersin region
Citation
Şahin, A., Sönmez, T., & Kahriman, A. (2017). Single Entry Raw Wood Products Table construction for Calabrian pine (Pinus brutia Ten.) in Mersin region. Kastamonu University Journal Of Forestry Faculty, 17(1), 23-35.Abstract
The main purpose of this study was to construct ‘Raw Wood Products Table’ for the pure
and nature Calabrian pine stands within the border of Mersin Regional Directorate of Forestry. For this
purpose, 488 sample trees were cut and raw wood products which can be obtained as log, mine prop,
industrial wood and bark volume ratios were determined. Then, regression models were obtained with
relationship of these ratios and diameter at breast. ‘Single-Entry Raw Wood Products Table’ were created
by using these models. The coefficient of determination (R2
) and standard error were respectively 0.840
and 6.771 for log; 0.700 and 7.500 for industrial wood; 0.856 and 10.941 for mine prop and 0.972 and 0.401
for bark. Bu çalışmada, Mersin Orman Bölge Müdürlüğü sınırları içinde yer alan saf ve doğal Kızılçam
meşcereleri için ‘Odun Ürün Çeşitleri Tablosu’ düzenlenmesi amaçlanmıştır. Bu amaçla, 488 adet Kızılçam
ağacı kesilmiş ve bu ağaçlardan elde edilebilecek odun ürün çeşitleri olan tomruk, maden direği, sanayi
odunu ve kabuk oranları belirlenmiştir. Sonra bu oranlar göğüs çapı ile ilişkiye getirilerek regresyon
modelleri elde edilmiştir. Bu modellerin kullanılmasıyla da Kızılçam için ‘Tek Girişli Odun Ürün Çeşitleri
Tablosu’ oluşturulmuştur. Çalışma kapsamında elde edilen modellere ilişkin belirtme katsayıları (R2
) ve
standart hatalar (Sy.x) sırasıyla; tomruk için 0.840 ve 6.771; sanayi odunu için 0.700 ve 7.500; maden direği
için 0.856 ve 10.941 ve kabuk için de 0.972 ve 0.401 olarak hesaplanmıştır