dc.contributor.author | Adar, Muhammet | |
dc.contributor.author | Bingöl, Ahmet Ferhat | |
dc.contributor.author | Adar, Elanur | |
dc.date.accessioned | 2021-07-07T05:55:20Z | |
dc.date.available | 2021-07-07T05:55:20Z | |
dc.date.issued | 2020 | en_US |
dc.identifier.citation | Adar, M , Bingöl, F , Adar, E . (2020). Kendiliğinden Yerleşen Betonun İşlenebilirliğine ve Yüksek Sıcaklık Direncine Polipropilen Lifin Etkisi . Bitlis Eren Üniversitesi Fen Bilimleri Dergisi , 9 (2) , 719-732 . DOI: 10.17798/bitlisfen.572211 | en_US |
dc.identifier.uri | https://hdl.handle.net/11494/3271 | |
dc.description.abstract | Konvansiyonel betona kıyasla yüksek işlenebilirlik, düşük işçilik maliyeti ve yüksek dayanım gibi avantajlar
sağlayan kendiliğinden yerleşen beton (KYB) yüksek performanslıdır. Bu çalışma ile kendiliğinden yerleşen
betonlarda, polipropilen lif miktarının (0,25; 0,50; 0,75 ve 1,00 kg/m3
) taze betonun işlenebilirliği ve sertleşmiş
betonların da bazı mekanik dayanım özellikleri üzerindeki etkisi belirlenerek; farklı sıcaklıkların (25, 250, 500 ve
750 °C) sertleşmiş KYLB’lar üzerindeki etkilerinin araştırılması amaçlanmaktadır. Sertleşmiş numuneler 25, 250,
500 ve 750°C sıcaklıklarına tabi tutulmuştur. Ayrıca, numunelerin boşluk yapıları hakkında fikir edinmek için
ultrases geçiş hızı ölçümleri gerçekleştirilmiştir. Çalışma sonucunda, polipropilen lif miktarının artması ile
kendiliğinden yerleşen betonun akıcılığının olumsuz yönde etkilendiği, basınç dayanımının değişmediği ve çekme
dayanımının olumlu yönde değiştiği gözlenmiştir. 500ºC ve üzeri sıcaklıklarda, beton basınç dayanımının ve
ultrases geçiş hızlarının azaldığı tespit edilmiştir. Sıcaklık arttıkça polipropilen liflerin eridiği ve bunun sonucu
olarak betonda oluşan boşlukların artması ile dayanımının azaldığı gözlenmiştir. 750 ºC’de en fazla mukavemet
kaybı görülmüştür. | en_US |
dc.description.abstract | Self-consolidating concrete (SCC) that provides advantages such as high workability, low labor cost and high
strength compared to conventional concrete has high performance. The aim of this study is to determine the effect
of polypropylene fiber amount (0.25; 0.50; 0.75 and 1.00 kg/m3
) on the workability and strength properties of fiber
reinforced self-consolidating concretes. Hardened samples were subjected to temperatures of 25, 250, 500 and 750
°C. In addition, ultrasound pulse velocity measurements were performed to obtain an idea about the void structures
of the samples. As a result of the study, it was observed that as the amount of polypropylene fiber increased, the
fluidity of the self-consolidating concrete negatively affected, the compressive strength did not change and the
tensile strength changed positively. It was determined that the concrete compressive strength and ultrasound
transition velocities decreased in the temperatures of 500ºC and above. It has been observed that as the temperature
increased, the polypropylene fibers melted and as a result of which, with the increase of gaps in concrete, its
strength decreases. The highest loss of strength was observed at 750ºC. | en_US |
dc.language.iso | tur | en_US |
dc.publisher | Bitlis Eren Üniversitesi | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject | Kendiliğinden yerleşen beton | en_US |
dc.subject | Yüksek sıcaklık | en_US |
dc.subject | Uçucu kül | en_US |
dc.subject | Polipropilen lif | en_US |
dc.subject | Ultrases geçiş hızı | en_US |
dc.subject | Sertleşmiş beton deneyleri | en_US |
dc.subject | Self-consolidating concrete | en_US |
dc.subject | High temperature | en_US |
dc.subject | Fly ash | en_US |
dc.subject | Polypropylene fiber | en_US |
dc.subject | Ultrasound pulse rate | en_US |
dc.subject | Hardened concrete tests | en_US |
dc.title | Kendiliğinden yerleşen betonun işlenebilirliğine ve yüksek sıcaklık direncine polipropilen lifin etkisi | en_US |
dc.title.alternative | Effect of Polypropylene Fiber on Workability and High Temperature Resistance of Self-Compacting Concrete | en_US |
dc.type | article | en_US |
dc.relation.journal | Bitlis Eren Üniversitesi Fen Bilimleri Dergisi | en_US |
dc.department | AÇÜ, Mühendislik Fakültesi, Çevre Mühendisliği Bölümü | en_US |
dc.authorid | 0000-0002-9609-0439 | en_US |
dc.identifier.volume | 9 | en_US |
dc.identifier.issue | 2 | en_US |
dc.identifier.startpage | 719 | en_US |
dc.identifier.endpage | 732 | en_US |
dc.relation.publicationcategory | Makale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.identifier.doi | 0.17798/bitlisfen.572211 | en_US |
dc.contributor.institutionauthor | Adar, Elanur | |