Basit öğe kaydını göster

dc.contributor.authorDoğu, Dilek
dc.contributor.authorBakır, Davut
dc.contributor.authorTuncer, F. Çiğdem
dc.contributor.authorHizal, Kamile Tirak
dc.contributor.authorÜnsal, Öner
dc.contributor.authorCandan, Zeki
dc.date.accessioned2021-07-08T11:42:36Z
dc.date.available2021-07-08T11:42:36Z
dc.date.issued2016en_US
dc.identifier.citationDoğu, D., Bakır, D., Tuncer, F. D., Tirak Hizal, K., Unsal, O., & Candan, Z. (2016). Microscopic investigation of defects in thermally compressed poplar wood panels. Maderas. Ciencia y tecnología, 18(2), 337-348.en_US
dc.identifier.urihttps://hdl.handle.net/11494/3286
dc.description.abstractThe combined effects of temperature and compression on the microstructure of solid-wood panels produced by Aspen (Populus tremula) wood were evaluated. Thermal compression was applied on aspen wood to increase the density for improving its physical and mechanical properties. The solid wood panels with dimensions of 100 mm by 500 mm by 25 mm were hot-pressed by using a laboratory hot press at a temperature of either 150 °C or 170 °C and pressure of either 1MPa or 2 MPa, respectively, for 45 min. Changes in the microstructure were detected by using a light microscope. The microscopic investigations revealed that the wood exhibited much defects in the process conditions of 170 ºC / 2 MPa, and the distribution of defects were not uniform in the growth rings of the wood specimens in the two treatment groups. All defects in cell structure were quite distinct in the beginning and the last parts of the growth rings and the largest damages occurred in the fibers and vessels for the two process conditions. The results indicate that growth ring structure, vessel porosity, and cell wall thickness have a strong effect on wood behavior in various process conditions.en_US
dc.language.isoengen_US
dc.publisherUniv Bio- Bioen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCellular failureen_US
dc.subjectPoplar wooden_US
dc.subjectThermally compressed wooden_US
dc.subjectWood densificationen_US
dc.subjectWood microstructureen_US
dc.titleMicroscopic investigation of defects in thermally compressed poplar wood panelsen_US
dc.typearticleen_US
dc.relation.journalMaderas: Ciencia y Tecnologiaen_US
dc.departmentAÇÜ, Orman Fakültesi, Orman Endüstri Mühendisliği Bölümüen_US
dc.authorid0000-0001-5480-1872en_US
dc.identifier.volume18en_US
dc.identifier.issue2en_US
dc.identifier.startpage337en_US
dc.identifier.endpage348en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.doi10.4067/S0718-221X2016005000031en_US
dc.contributor.institutionauthorBakır, Davut


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster