The role of solid content of adhesive and panel density on the dimensional stability and mechanical properties of particleboard

Basit Öğe Kaydı
dc.contributor.authorSarı, Bünyamin
dc.contributor.authorNemli, Gökay
dc.contributor.authorBaharoğlu, Mehmet
dc.contributor.authorBardak, Selahattin
dc.contributor.authorZekovic, Emir
dc.date.accessioned2021-12-06T06:40:35Z
dc.date.available2021-12-06T06:40:35Z
dc.date.issued2013
dc.departmentAÇÜ, Orman Fakültesi, Orman Endüstri Mühendisliği Bölümüen_US
dc.description.abstractThe aim of this study was to investigate the role of the panel density and solid content of adhesive on the physical (thickness swelling) and mechanical properties (modulus of rupture, modulus of elasticity, and internal bonding strength) of particleboard composite. For the changing panel density, two different target densities (0.60 and 0.65 g/cm(3)), three different hot pressing pressures (20, 25, and 30 kg/cm(2)), two different shelling ratios (35% and 45%), and two different surface coating materials (at 70 and 90 g/m(2) grammage) were applied during the manufacturing of test panels. Increasing pressure improved all the properties of particleboard. However, applying lower or higher pressure level than required and necessary level negatively affected the thickness of the panels. Shelling ratio was found to be effective on the mechanical and physical properties of particleboard. Increasing panel density improved the strength properties and thickness swelling after 2 h immersion. However, high panel density negatively affected the thickness swelling after 24 h immersion. Coating of particleboard surfaces caused superior mechanical, except for internal bond strength, and physical properties. Melamine-impregnated paper grammage significantly improved the modulus of rupture, modulus of elasticity, and thickness swelling. Increasing paper grammage improved these properties. However, internal bond strength was not affected by paper grammage. Decreasing solid content of adhesive in the surface layers significantly improved all the properties of particleboard composite.
dc.identifier.citationSarı, B., Nemli, G., Baharoğlu, M., Bardak, S., & Zekoviç, E. (2013). The role of solid content of adhesive and panel density on the dimensional stability and mechanical properties of particleboard. Journal of Composite Materials, 47(10), 1247-1255.en_US
dc.identifier.doi10.1177/0021998312446503
dc.identifier.endpage1255en_US
dc.identifier.issue10en_US
dc.identifier.scopusqualityQ1
dc.identifier.startpage1247en_US
dc.identifier.urihttps://hdl.handle.net/11494/3584
dc.identifier.volume47en_US
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorBardak, Selahattin
dc.language.isoenen_US
dc.publisherSage Publicationsen_US
dc.relation.ispartofJournal of Composite Materials
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectParticleboarden_US
dc.subjectPanel densityen_US
dc.subjectSolid contenten_US
dc.subjectMechanical propertiesen_US
dc.subjectPhysical propertiesen_US
dc.subjectSurface treatmentsen_US
dc.titleThe role of solid content of adhesive and panel density on the dimensional stability and mechanical properties of particleboarden_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
bunyamin_sari.pdf
Boyut:
264.77 KB
Biçim:
Adobe Portable Document Format
Açıklama:
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Orman Endüstri Mühendisliği Bölümü Yayın Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu