Effect of growing altitude, particle drying temperature and press temperature on some technological properties of particleboard produced from black alder wood

Basit Öğe Kaydı
dc.authorid0000-0002-0661-9109en_US
dc.contributor.authorKumaş, İlknur
dc.contributor.authorAras, Uǧur
dc.contributor.authorKalaycıoğlu, Hülya
dc.contributor.authorSerdar, Bedri
dc.contributor.authorYel, Hüsnü
dc.date.accessioned2021-06-23T11:17:00Z
dc.date.available2021-06-23T11:17:00Z
dc.date.issued2021
dc.departmentAÇÜ, Orman Fakültesi, Orman Endüstri Mühendisliği Bölümüen_US
dc.description.abstractThis study investigated the effects of the growing altitude, particle drying temperature and press temperature on some technological properties of particleboard produced from black alder wood. The particles were produced from wood taken from the KTÜ Campus and from Çamoba in Trabzon. Production and tests of the experimental particleboards were carried out at Kastamonu Integrated Wood Company. In production of the particleboards, wood from different growing altitudes [50 m and 250 m] was used, and different drying temperatures [120 and 150 °C] and press temperatures [150 and 200 °C] were applied. Mechanical, physical and anatomical properties of the produced boards were investigated. According to the results, the mechanical properties deteriorate when the altitude increases. Increasing the particle drying temperature and press temperature had a positive effect on dimensional stability. A high press temperature improved the mechanical properties of the boards. In addition, growing altitude had an effect on anatomical properties: when the altitude increased, the diameter of vessels narrowed, the number of vessels per mm2 increased, and fiber length decreased. This resulted in a deterioration in mechanical properties at the higher altitude.
dc.identifier.citationKumaş, İ., Aras, U., Kalaycıoğlu, H., Serdar, B. (2021). Effect of growing altitude, particle drying temperature and press temperature on some technological properties of particleboard produced from black alder wood, Instytut Technologii Drewna, 64(207)en_US
dc.identifier.doi10.12841/wood.1644-3985.342.05
dc.identifier.issue207en_US
dc.identifier.scopusqualityQ3
dc.identifier.urihttps://hdl.handle.net/11494/3233
dc.identifier.volume64en_US
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorYel, Hüsnü
dc.language.isoenen_US
dc.publisherInstytut Technologii Drewnaen_US
dc.relation.ispartofDrewno
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAnatomical factorsen_US
dc.subjectBlack alderen_US
dc.subjectDrying temperatureen_US
dc.subjectGrowing altitudeen_US
dc.subjectPhysical and mechanical propertiesen_US
dc.subjectPress conditionsen_US
dc.titleEffect of growing altitude, particle drying temperature and press temperature on some technological properties of particleboard produced from black alder wooden_US
dc.typeArticle

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Orman Endüstri Mühendisliği Bölümü Yayın Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu