Mechanical properties of impregnated and heat treated oriental beech wood

Basit Öğe Kaydı
dc.authorid0000-0003-2011-0410en_US
dc.authorid0000-0002-7771-6993en_US
dc.contributor.authorTürkoğlu, Türkay
dc.contributor.authorBaysal, Ergün
dc.contributor.authorYüksel, Mehmet
dc.contributor.authorPeker, Hüseyin
dc.contributor.authorSaçlı, Cevdet
dc.contributor.authorKüreli, İhsan
dc.contributor.authorToker, Hilmi
dc.date.accessioned2020-05-27T13:29:09Z
dc.date.available2020-05-27T13:29:09Z
dc.date.issued2016
dc.departmentAÇÜ, Rektörlüken_US
dc.description.abstractThe main purpose of this study was to investigate mechanical properties such as the modulus of rupture (MOR) and compression strength parallel to grain (CSPG) of impregnated and heat-treated Oriental beech (Fagus orientalis L.) wood. Some copper and boron containing impregnation chemicals such as Wolmanit CX-8 (WCX-8) and Celcure AC-500 (CAC500) were used. Wood specimens were impregnated 2% aqueous solution of the chemicals according to ASTM D1413-07e1 standard. The wood specimens were heated at 150 and 175 °C for 4 and 8 h, respectively. Results showed that both impregnation and heat treatment decreased the MOR and CSPG of Oriental beech wood. The MOR losses of Oriental beech after both treatments were higher than CSPG losses. The largest reduction of MOR and CSPG were observed with 51.5% and 15.5% for CAC-500 impregnated and heated at 175 °C for 8 h. Except for WCX-8 impregnation and heat treatment at 150 °C for 4 and 8 h, the MOR values of impregnated and heat-treated Oriental beech wood were lower than only heat-treated Oriental beech wood. It was also found that the CSPG values of impregnated and heat-treated Oriental beech wood were higher than only heat-treated Oriental beech wood, except for impregnation and heat treatment at 175 °C for 8 h.
dc.identifier.citationTüğrkoğlu, T., Baysal, E., Yüksel, M., Peker, H., Sacli, C., Küreli, I., & Toker, H. (2016). Mechanical properties of impregnated and heat treated oriental beech wood. BioResources, 11(4), 8285-8296.en_US
dc.identifier.doi10.15376/biores.11.4.8285-8296
dc.identifier.endpage8296en_US
dc.identifier.issue4en_US
dc.identifier.scopusqualityQ3
dc.identifier.startpage8285en_US
dc.identifier.urihttps://hdl.handle.net/11494/2073
dc.identifier.volume11en_US
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorKüreli, İhsan
dc.institutionauthorPeker, Hüseyin
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioResources
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectHeat treatmenten_US
dc.subjectOriental beechen_US
dc.subjectModulus of ruptureen_US
dc.subjectCompression strength parallel to grainen_US
dc.titleMechanical properties of impregnated and heat treated oriental beech wooden_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
turkay.turkoglu.pdf
Boyut:
574.94 KB
Biçim:
Adobe Portable Document Format
Açıklama:
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Orman Endüstri Mühendisliği Bölümü Yayın Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu