Effects of steaming, drying temperature, and adhesive type on static bending properties of LVL made of picea orientalis and abies nordmanniana veneers
Yükleniyor...
Dosyalar
Tarih
2015
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
North Carolina State Univ Dept Wood & Paper Sci
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The modulus of elasticity (MOE) and modulus of rupture (MOR) were evaluated for laminated veneer lumber (LVL) in static bending. The studied species were spruce (Picea orientalis) and fir (Abies nordmanniana) originated from the Eastern Black sea region and prepared with phenol-formaldehyde and melamine-urea-formaldehyde. The effect of wood species, steaming, drying temperature, and type of adhesive on static bending MOE and MOR were determined. According to the experimental results, the bending strength of spruce wood (Macka) treated with phenol formadehyde adhesives is the highest for the specimens steamed for 6 h at a drying temperature of 110 degrees C. Furthermore, the modulus of elasticity for spruce wood (Macka) treated with phenol formadehyde adhesive is the highest for the specimens steamed for 12 h and subjected to a drying temperature of 150 degrees C.
Açıklama
Anahtar Kelimeler
Adhesives, Bending strength, Modulus of elasticity, Laminated veneer lumber
Kaynak
BioResources
WoS Q Değeri
N/A
Scopus Q Değeri
Q3
Cilt
10
Sayı
1
Künye
Peker, H., Tan, H., & Ersen, N. (2015). Effects of steaming, drying temperature, and adhesive type on static bending properties of LVL made of Picea orientalis and Abies nordmanniana veneers. BioResources, 10(1), 79-87.
