Effects of CNC processing parameters on surface quality of wood-based panels used in furniture industry

Basit Öğe Kaydı
dc.authoridEvren Osman Çakıroğlu / 0000-0001-5303-8967en_US
dc.contributor.authorDemir, Aydın
dc.contributor.authorÇakıroğlu, Evren Osman
dc.contributor.authorAydın, İsmail
dc.date.accessioned2023-01-12T07:29:13Z
dc.date.available2023-01-12T07:29:13Z
dc.date.issued2022
dc.departmentAÇÜ, Artvin Meslek Yüksekokulu, İç Mekan Tasarımı Bölümüen_US
dc.description.abstractThe processing of wood-based panels such as plywood, particleboard and fiberboard, which are widely used in the furniture industry, with CNC (Computer Numerical Control) milling machines has been increasing recently. Even though CNC milling machines have many advantages for furniture producers, it is difficult to set process parameters to obtain the desired surface quality of the material. Therefore, it is necessary to determine the most suitable of these parameters for the surface quality of each wood-based panel. This study aimed to determine the effects of processing parameters on the surface quality of plywood, particleboard and medium density fiberboard (MDF) panels processed in CNC milling machines. Furthermore, the average surface roughness values of these panels were compared after CNC processing. Three spindle rotational frequencies (10.000, 14.000 and 18.000 rpm), three feed rates (5, 7, and 9 m/min) and two cutting tool diameters (2 and 5 mm) were selected as CNC processing parameters. To determine the surface quality of wood-based panels, the surface roughness measurements were performed according to DIN 4768 standard and three surface roughness parameters (Ra, Rmax and Rz) were determined. According to the results of this study, it can be concluded that the surface roughness values of wood-based panels decreased with increasing spindle rotational frequency and feed rate, while they increased with increasing cutting tool diameter. Among the wood-based panels used in this study, the lowest average roughness values were obtained for plywood samples.
dc.identifier.citationDemir, A., Cakiroglu, E. O., & Aydin, I. (2022). Effects of CNC Processing Parameters on Surface Quality of Wood-Based Panels Used in Furniture Industry. Drvna Industrija, 73(4), 363–371.en_US
dc.identifier.doi10.5552/drvind.2022.2109
dc.identifier.endpage371en_US
dc.identifier.issue4en_US
dc.identifier.startpage363en_US
dc.identifier.urihttps://doi.org/10.5552/drvind.2022.2109
dc.identifier.urihttps://hdl.handle.net/11494/4504
dc.identifier.volume73en_US
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.institutionauthorÇakıroğlu, Evren Osman
dc.language.isoenen_US
dc.publisherZagreb Univ.en_US
dc.relation.ispartofDrvna Industrija
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectWood-based panelen_US
dc.subjectCNC milling machineen_US
dc.subjectSurface roughnessen_US
dc.subjectProcessing parametersen_US
dc.titleEffects of CNC processing parameters on surface quality of wood-based panels used in furniture industryen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Demir, Aydın.pdf
Boyut:
704.94 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Artvin MYO Koleksiyonu Yayın Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu