Taguchi based parameters optimization in electrospray cooling with mixed working fluids
| dc.authorid | 0000-0002-3049-9493 | |
| dc.contributor.author | Kabakuş, Abdüssamed | |
| dc.date.accessioned | 2026-07-06T13:02:02Z | |
| dc.date.available | 2026-07-06T13:02:02Z | |
| dc.date.issued | 2025 | |
| dc.department | AÇÜ, Artvin Meslek Yüksekokulu, Makine Bölümü | |
| dc.description.abstract | The rapid increase in power density of modern electronic devices has made compact and effective cooling strategies indispensable. In this work, the Taguchi experimental design method was employed to optimize electrospray cooling performance. Experiments were conducted with a constant nozzle diameter and a fixed nozzle-to-heat sink distance, using three different working fluids (100% ethanol, 90% ethanol-10% water, and 80% ethanol-20% water), flow rates between 0.3-0.5 ml/min, and applied voltages ranging from 6-10 V. The temperature difference (ΔT) was used as the primary evaluation parameter. Analysis of variance indicated that fluid composition and flow rate significantly influence cooling efficiency, whereas voltage plays a relatively minor role. The most favorable operating condition was identified as 80% ethanol-20% water at 0.5 ml/min and 6 V. | |
| dc.identifier.doi | 10.17654/0973576325039 | |
| dc.identifier.endpage | 760 | |
| dc.identifier.issn | 09735763 | |
| dc.identifier.issue | 5 | |
| dc.identifier.scopus | 2-s2.0-105022058594 | |
| dc.identifier.scopusquality | Q4 | |
| dc.identifier.startpage | 749 | |
| dc.identifier.uri | https://hdl.handle.net/11494/6253 | |
| dc.identifier.volume | 38 | |
| dc.indekslendigikaynak | Scopus | |
| dc.institutionauthor | Kabakuş, Abdüssamed | |
| dc.institutionauthorid | 0000-0002-3049-9493 | |
| dc.language.iso | en | |
| dc.publisher | Pushpa Publishing House | |
| dc.relation.ispartof | JP Journal of Heat and Mass Transfer | |
| dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | |
| dc.rights | info:eu-repo/semantics/openAccess | |
| dc.subject | Electrospray cooling | |
| dc.subject | Heat sink | |
| dc.subject | Optimization | |
| dc.subject | Taguchi method | |
| dc.title | Taguchi based parameters optimization in electrospray cooling with mixed working fluids | |
| dc.type | Article |












