Utilization of sunflower stalk in manufacture of thermoplastic composite

Basit Öğe Kaydı
dc.authorid0000-0002-9991-4800en_US
dc.contributor.authorKaymakçı, Alperen
dc.contributor.authorAyrılmış, Nadir
dc.contributor.authorÖzdemir, Ferhat
dc.contributor.authorGüleç, Türker
dc.date.accessioned2021-12-08T07:33:28Z
dc.date.available2021-12-08T07:33:28Z
dc.date.issued2013
dc.departmentAÇÜ, Orman Fakültesi, Orman Endüstri Mühendisliği Bölümüen_US
dc.description.abstractDimensional stability and mechanical performance of polypropylene thermoplastic composites filled with sunflower stalk (SS) flour at 30, 40, 50, and 60 wt% contents of the SS flour were investigated. The thickness swelling and water absorption of the specimens increased with increasing SS flour content. The modulus in the flexural and tensile improved with increasing SS flour content while the tensile and flexural strengths of the specimens decreased. The use of maleic anhydride polypropylene (3 wt%) had a positive effect on the dimensional stability and mechanical properties of the polypropylene thermoplastic composites filled with SS flour. The melting temperature of polypropylene decreased with increasing content of the SS flour. The degree of crystallinity of filled polypropylene composites between fibre loading of 0-30 % by weight was higher than that of unfilled polypropylene composites. However, further increment in the filler content decreased the degree of crystallinity. The obtained results showed that SS flour could be potentially suitable raw material in the manufacture of polypropylene composites.
dc.identifier.citationKaymakçı, A., Ayrılmış, N., Özdemir, F., & Güleç, T. (2013). Utilization of sunflower stalk in manufacture of thermoplastic composite. Journal of Polymers and the Environment, 21(4), 1135-1142.en_US
dc.identifier.doi10.1007/s10924-012-0564-9
dc.identifier.endpage1142en_US
dc.identifier.issue4en_US
dc.identifier.scopusqualityQ1
dc.identifier.startpage1135en_US
dc.identifier.urihttps://hdl.handle.net/11494/3593
dc.identifier.volume21en_US
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorGüleç, Türker
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal Of Polymers and the Environment
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectDimensional stabilityen_US
dc.subjectWaste sunflower stalken_US
dc.subjectLignocellulosic filled polypropylene compositeen_US
dc.subjectMechanical testingen_US
dc.titleUtilization of sunflower stalk in manufacture of thermoplastic compositeen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
alperen_kaymakci.pdf
Boyut:
432.21 KB
Biçim:
Adobe Portable Document Format
Açıklama:
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Orman Endüstri Mühendisliği Bölümü Yayın Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu