The effect of fabrication method on physical properties of different Y211 and 20% Ag2O added YBCO sample

Basit Öğe Kaydı
dc.contributor.authorDuman, Şeyda
dc.contributor.authorÇakır, Bakiye
dc.contributor.authorBaşoğlu, Mehmet
dc.contributor.authorKüçükömeroğlu, Tayfur
dc.contributor.authorAydıner, Alev
dc.date.accessioned2025-07-18T10:58:56Z
dc.date.available2025-07-18T10:58:56Z
dc.date.issued2023
dc.departmentAÇÜ, Sağlık Hizmetleri Meslek Yüksekokulu, Tıbbi Hizmetler ve Teknikler Bölümü
dc.description.abstractIn this study, it is aimed to investigate the effects of production methods on the physical properties of 20% Ag2O and different ratios of Y211 added YBCO samples. In this context, the samples with Y123 + x % (x = 20, 25, 30) Y211 + 20%Ag2O compositions were fabricated by MPMG and TSMG methods in two groups to join YBCO main samples. XRD measurements were performed to determine the characteristic peaks. Trapped magnetic fields and vertical levitation forces between the bulk samples and a permanent magnet were measured using a computer-controlled system in ZFC at 77 K. From the XRD measurements, it was found that MPMG YBCO samples had a dominant superconducting structure and partially showed orientation peaks in the c-axis direction, while TSMG YBCO samples were single-crystal samples oriented along the c-axis. From the trapped magnetic field measurement results, the trapped magnetic field value of the Y123 + 25%Y211 + 20%Ag2O (TAg25) sample prepared by the TSMG method was higher than that of the other samples. Among the levitation force measurement results, the maximum repulsive force values of TAg25 and TAg30 (Y123 + 30%Y211 + 20%Ag2O) samples are the highest. At the same time, the hysteresis widths of these samples are also the highest, which proves that their flux-pinning potential is higher than that of the other samples.
dc.identifier.doi10.1007/s10854-023-10674-6
dc.identifier.issn09574522
dc.identifier.issue15
dc.identifier.scopuss2.0-85160200533
dc.identifier.scopusqualityQ2
dc.identifier.urihttps://hdl.handle.net/11494/5839
dc.identifier.volume34
dc.indekslendigikaynakScopus
dc.institutionauthorDuman, Şeyda
dc.institutionauthorÇakır, Bakiye
dc.language.isoen
dc.publisherSpringer
dc.relation.ispartofJournal of Materials Science: Materials in Electronics
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectCrystal orientation
dc.subjectFlux pinning
dc.subjectPermanent magnets
dc.subjectPhysical properties
dc.subjectSingle crystals
dc.subjectX ray diffraction
dc.titleThe effect of fabrication method on physical properties of different Y211 and 20% Ag2O added YBCO sample
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
5839.pdf
Boyut:
2.06 MB
Biçim:
Adobe Portable Document Format
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.17 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Sağlık Hizmetleri Meslek Yüksekokulu Yayın Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu