Characterization of wood dust emission according to some wood species in 3D machining applied with CNC machine

Basit Öğe Kaydı
dc.contributor.authorÇakıroğlu, Evren Osman
dc.contributor.authorDemirarslan, Kazım Onur
dc.contributor.authorTaşdemir, Taner
dc.date.accessioned2025-06-20T08:03:57Z
dc.date.available2025-06-20T08:03:57Z
dc.date.issued2025
dc.departmentAÇÜ, Artvin Meslek Yüksekokulu, İç Mekan Tasarımı Bölümü
dc.departmentAÇÜ, Mühendislik Fakültesi, Çevre Mühendisliği Bölümü
dc.description.abstractThe use of CNC machines for woodworking is becoming increasingly widespread due to advancing technology. In this study, while 3D processing is performed on wood materials using a CNC machine, the aim is to determine wood dust emissions (PM2.5, PM10) according to processing parameters and wood species. Yellow pine, spruce, chestnut, sapelli, and beech are wood species frequently preferred in furniture businesses. Utilizing a CNC machine equipped with 2 mm and 10 mm diameter cutting tools, the wooden material was machined at a spindle speed of 18,000 RPM, a plunge rate of 4000 mm/min, and a cutting speed of 8000 mm/min. For the study, a 3D-modeled motif with curved lines was selected and applied to wooden prisms measuring 30 cm × 30 cm × 30 mm (width, length, thickness). In conclusion, Yellow pine, with its high hardness and dense structure, generates significantly more dust than spruce during CNC machining. This result reveals that different wood species exhibit different levels of environmental impact during CNC processing. This underscores the urgent need for appropriate air filtration and emission control systems, particularly for woods that produce high emissions. Fine cutting edges effectively reduce PM2.5 and PM10 concentrations, enhancing workplace air quality. By reducing exposure to wood dust, which is harmful to human health, this study plays a crucial role in addressing this pressing issue and allows for the implementation of suitable arrangements with minimal chip removal for CNC parameters.
dc.identifier.doi10.1007/s00107-025-02222-2
dc.identifier.issn00183768
dc.identifier.issue2
dc.identifier.scopus2-s2.0-85218409209
dc.identifier.scopusqualityQ2
dc.identifier.urihttps://hdl.handle.net/11494/5558
dc.identifier.volume83
dc.identifier.wosWOS:001424949400002
dc.identifier.wosqualityQ2
dc.indekslendigikaynakScopus
dc.indekslendigikaynakWeb of Science
dc.institutionauthorÇakıroğlu, Evren Osman
dc.institutionauthorDemirarslan, Kazım Onur
dc.institutionauthorTaşdemir, Taner
dc.language.isoen
dc.publisherSpringer Science and Business Media Deutschland GmbH
dc.relation.ispartofEuropean Journal of Wood and Wood Products
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectBioremediation
dc.subjectDust control
dc.subjectEmission control
dc.subjectFurniture manufacture
dc.subjectTimber
dc.subjectWood products
dc.subjectWoodworking
dc.subjectWoodworking machinery
dc.subjectWoodworking tools
dc.titleCharacterization of wood dust emission according to some wood species in 3D machining applied with CNC machine
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
5558.pdf
Boyut:
3.78 MB
Biçim:
Adobe Portable Document Format
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.17 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Artvin MYO Koleksiyonu Yayın Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu
Çevre Mühendisliği Bölümü Yayın Koleksiyonu